Contents

iCare Slim
Screw
USB charging cable iCare Slim Screw with patented magnetic plug

Device Description

  1. Charging Socket
  2. LED Light
  3. Power Switch
  4. Tapped hole
  5. Cable tie hole
  6. Cable tie hole
  7. Cable tie hole
  8. Cable tie hole
  9. Tapped hole
  10. IMEI Barcode
  11. IMEI Number
  • ■ Low Battery : blinking red light
  • ■ GPS Signal : blinking blue light
  • ■ GSM Signal : blinking green light

Operation Description

General usage condition :
(1)Turn on the iCare Buddy II by long pressing the power button, LED indicators will rise simultaneously.
(2)Turn off the iCare Buddy II by long pressing the power button, LED indicators will be extinguished sequentially.
(3)Reporting interval will remain the previous setting even the device is turning off.
SOS Function :
Turn off :
(1)After temporaily press the power button, LED indicators will flash immediately and trigger SOS function.
(2)APP will received 6 notifications of SOS alarm.
(3)Turn off the iCare mini by keep pressing the power button; Current reporting interval will be reset to deault (normal mode) while iPet mini turning off.
Turn on :
(1)After temporaily press the power button, LED indicators will flash immediately and trigger SOS function.
(2)Reporting interval will remain the previous setting even the device is turning off.
Charging :
  • Use USB charging cable.
  • Use the charging cable to connect to charging socket.
  • When the tracker is charging, the red LED light will light up.
  • When fully charged, the red LED light will turn into green.

How to link the device

Click to see the full menu.
Click to add new devices.
There are two ways to add new devices.
You may enter IMEI number.
or scan IMEI barcode.
Adding successfully.
You may see the new tracker in the menu bar.

Tips on using the device

About Global Positioning System (GPS)
  1. GPS will work better under outdoors and clear sky.
  2. When working in proximity of buildings, valleys or on the streets, the postion might not be that accurate due to the envirmental condition.
  3. If the device is used under bad weather or indoors, the device might not be able to position itself.
About Location-Base Service (LBS)
  1. LBS positions mean the position of the nearest cellular tower, not the real position.
  2. Due to the fact that there are more cellurlar tower in metropolis area, the LBS positon will be more accurate than in suburb areas.
  3. Different trackers in same physical location might apear on different positon in LBS position because they use different cellular tower to positon itself.
  4. This product operates on GSM signals. If there are no GSM signals at all, the tracker will not function properly.
About Sleeping status
  1. The device will enter sleeping status in normal and urgent mode, seizing all network connection and GPS function. When the device senses movement, it will resume its function.
  2. The device will not enter sleeping status in power saving mode.