Contents

iCar Bubby II
USB Charging Cable with patented magnetic plug

Device Description

  1. Charging Socket
  2. LED Light
  3. Power switch
  4. IMEI Barcode
  5. IMEI Number
  • ■ Low Battery: blinking red light
  • ■ GPS Signal: blinking blue light
  • ■ GSM Signal: blinking green light

User Guide

Turn On:
Press power switch for 3 seconds, Tri-color LED light (Green, Blue ＆ Red) will light up at the same time, then light off together.
Turn Off:
Press power switch for 3 seconds, Tri-color LED light (Green, Blue ＆ Red) will light up at the same time, then light off one by one.
Charging:
  • Use USB Charging Cable with patented magnetic plug.

  • Link the plug to charging socket.

  • When the tracker is charging, the red LED light will light up.

  • When fully charged, the red LED light will turn into green.

How to link the device

Click to see the full menu.
Click to add new devices.
There are two ways to add new devices.
After entering the IMEI bar code, type the default password "12345678"
After scaning the IMEI bar code, type the default password "12345678"
Adding successful.
You may see the new tracker in the menu bar.

Tips on using the device

About Global Positioning System (GPS)
  1. GPS will work better under outdoors and clear sky.
  2. When working in proximity of buildings, valleys or on the streets, the postion might not be that accurate due to the envirmental condition.
  3. If the device is used under bad weather or indoors, the device might not be able to position itself.
  4. If the automotive window film contain metallized or defogging heating layer, it might be disturbing the signal strength of the GPS, even can't received the GPS signal successfully.
About Location-Base Service (LBS)
  1. LBS positions mean the position of the nearest cellular tower, not the real position.
  2. Due to the fact that there are more cellurlar tower in metropolis area, the LBS positon will be more accurate than in suburb areas.
  3. Different trackers in same physical location might apear on different positon in LBS position because they use different cellular tower to positon itself.
  4. This product operates on GSM signals. If there are no GSM signals at all, the tracker will not function properly.
About Sleeping mode
  1. The device will enter sleeping mode in normal and urgent mode, seizing all network connection and GPS function. When the device senses movement, it will resume its function.
  2. The device will not enter sleeping mode in power saving mode.